disposable medical pre-filled syringe injector cbd oil filling syringe
Specification
|
1:The syringe is made from heat resistant borosilicate glass.
|
||||
|
2:The material and construction is resistant to breakage from shock and sudden temperature changes.
|
||||
|
3:It is annealed and tested until free of internal strain, to withstand repeated washing with hot water.
|
||||
|
4:The cylinder-plunger fit is leak proof and meets.
|
||||
|
5:Plunger is individually ground and fitted to barrel for smooth movement with no back flow.
|
||||
|
6:Barrel rim is flat on both sides to prevent rolling and is wide enough for convenient finger top grip.
|
||||
|
7:The syringe is clearly marked with graduations. The graduations are permanently fused for lifetime legibility.
|
|
1ml standard φ10.85*35.7
|
1ml standard with needle (25G/27G)
|
|
1ml standard luer
|
|
|
1ml standard luer Lock (with rigid tip cap or flexible tip cap)
|
|
|
1ml long (slightness) φ8.15*54.0
|
1ml long with needle (25G/27G )
|
|
1ml long luer lock (with rigid tip cap or flexible tip cap)
|
|
|
2.25ml φ10.85*54.4
|
2.25ml with needle (25G)
|
|
2.25ml luer slip
|
|
|
2.25ml luer lock (with rigid tip cap or flexible tip cap)
|
|
|
3ml φ10.85*72.2
|
3ml Luer slip
|
|
3ml Luer Lock (with rigid tip cap or flexible tip cap)
|
|
|
5ml φ14.45*66.7
|
5ml Luer
|
|
5ml Luer Lock (with rigid tip cap or flexible tip cap)
|
|
|
Quality Standard
|
||||
|
Appearance
|
Glass syringes free of cracks, spot, dust. NO distorted for edge curl.
|
|||
|
Silicon content
|
≤0.7mg/pcs
|
|||
|
Particulate matter
|
Number of particles of each syringe:
≥10um no more than 60pcs, ≥25um no more than 6pcs
|
|||
|
Bacterial Endotoxin test
|
≤0.5EU/ml
|
|||
|
Sterility test
|
PASS
|
|||
